Mounting of Flexible Card Clothing

(Aproximate mounting tensions in KGS - fillet width in mm)

Foundation Per mm
fillet width		 60 mm 56 mm 51 mm 45 mm 34 mm
7 ply with felt 3.5 210 195 180 160 120
9 ply with felt 4.5 270 250 230 200 150
7 ply cushion 4mm 4.0 240 335 200 180 135
59 ply cushion 4mm 5.0 300 280 250 225 170
5 ply V.I.R. 0,5 mm 2.7 160 150 140 120 90
fancies, 5 ply cushion 3mm 2.0       90  

Card Clothing Counts

In the tables below you will find:

  • Cont.counts in round, biconvex and ovoid wire
  • The number of points/inch² for each of the count numbers.
  • Comparison figure for resistance, against the different count numbers.
  • The dimensions in mm. of the several wire sizes in round, biconvex and ovoid wire.

The figures in the column resistance are for comparison i.e. the resistance rate of bending to the corresponding diameters.

Round wire

No. Pts./In² Resist.
8 190 160
10 215 109
12 240 78
14 265 65
16 290 54
18 320 44
20 360 35
22 400 28
24 450 22
26 500 16
28 550 12
30 600 8

Bioconvex wire

No. Pts./In² Resit.
21/25 130 341
22/26 160 238
23/27 185 168
24/28 215 134
25/29 245 105
26/30 280 80
27/31 310 60
28/32 360 49
29/33 400 31

Ovide wire

No. Pts./In² Resit.
21/28 175 265
22/29 210 188
23/30 230 138
34/31 265 101
25/32 305 77

 

Wire No. Diam. Count No. Wire No. Height x Width Wire No. Height x Width
25 .530 8 21/25 .810 x .530 21/28 .810 x .405
26 .480 10 22/26 .710 x .480 22/29 .710 x .380
27 .430 12 23/27 .630 x .430 23/30 .630 x .355
28 .405 14 24/28 .580 x .405 24/31 .580 x .330
29 .380 16 25/29 .530 x .380 25/32 .530 x .305
30 .355 18 26/30 .480 x .355    
31 .330 20 27/31 .430 x .330    
32 .305 22 28/32 .405 x .305    
33 .280 24 29/33 .380 x .280    
34 .255 26 30/34 .355 x .255    
35 .230 28        
36 .205 30        
0
copyright © Howard Brush | Phone: 207-351-8011 | info@howardbrush.com